Engineering Drawing Techniques

Drawing Techniques Quiz Set-1 [2025]

by

Welcome to “Drawing Techniques Quiz Set-1 [2025]”!

In this blog, we’ve curated 50+ engaging multiple-choice questions covering the fundamental and advanced concepts of drawing techniques. “Drawing Techniques Quiz Set-1 [2025]” is designed to help you refresh your basics, challenge your knowledge, and gain practical insights into the art and principles of technical and artistic drawing.

Whether you’re a design student, an aspiring artist, or preparing for technical exams, this quiz is the perfect way to enhance your expertise in drawing techniques.

Let’s dive into the “Drawing Techniques Quiz Set-1 [2025]” and start exploring!

Engineering Drawing MCQ

Engineering Drawing

Engineering Drawing

Engineering Drawing is the Graphical representation of any idea of object which expresses
technical details without the barrier of a language and communicates ideas and information
from one mind to another
Engineering Drawing is the “Universal Language for Engineers”
One picture/drawing is equivalent to several sentences
Drawings are also necessary for engineering industries since they are required and are being
used at various stages of development of an engineering product

1 / 127

In first angle projection, object is assumed to be placed in

2 / 127

First angle and third angle projection methods are used in

3 / 127

Which is not pictorial projection?

4 / 127

In orthographic projection of third angle type, picture plane is

5 / 127

Axonometric projection is a special type of

6 / 127

In perspective projection the projectors are _________ to each other and ________ to picture plane.

7 / 127

In cavalier projection the receding lines are drawn _________

8 / 127

The faces parallel to projection plane are having ________ size and shape in oblique projection.

9 / 127

The perpendicular edges of planes parallel to projection plane are drawn at an angle of 30, 45, 60 degrees with the horizontal. The inclined lines are called _____________

10 / 127

Which of the following statement is wrong in case of oblique projection?

11 / 127

When the receding lines are drawn to half size scale then the oblique projection is__________

12 / 127

When the receding lines are drawn to full size scale then the oblique projection is___________

13 / 127

In oblique projection, the object is assumed to be placed with one face _______________

14 / 127

Which are not usually used as angle between the projection plane and receding lines for oblique projection?

15 / 127

Lines of sights (projectors) for orthographic projection will be ______________

16 / 127

Lines of sights (projectors) for oblique projection will be ______________

17 / 127

Isometric view of equilateral triangle will be _____________

18 / 127

Isometric view of cube is drawn and faces of cube are seen as ___________

19 / 127

Isometric view of cube is drawn the angle between the edge of cube and horizontal will be______

20 / 127

The length in isometric projection of line is 20 cm. What is the true length of it?

21 / 127

The value of the ratio of isometric length to true length is ________

22 / 127

The angle between the isometric axes is __________

23 / 127

If an isometric drawing is made with use of isometric scale then the drawings are called ___________

24 / 127

If an isometric projection is drawn with true measurements but not with isometric scale then the drawings are called ____________

25 / 127

If isometric projection of an object is drawn with true lengths the shape would be
same and size is how much larger than actual isometric projection?

26 / 127

What is additional 3rd view on orthographic projection in general for simple objects?

27 / 127

The front view of an object is shown on which plane?

28 / 127

In orthographic projection an object is represented by two or three views on different planes which _________________

29 / 127

The object we see in our surrounding usually without drawing came under which projection?

30 / 127

When the projectors are parallel to each other and also perpendicular to the plane, the
projection is called ___________________________

31 / 127

In orthographic projection, each projection view represents how many dimensions of an object?

32 / 127

In the Oblique projection an object is represented by how many views?

33 / 127

The straight lines which are drawn from various points on the contour of an object to meet a plane are called as _________

34 / 127

The shape of scales is

35 / 127

The drawing for municipality is drawn at scale

36 / 127

Which of the following is not a line segment?

37 / 127

When drawings are drawn larger than the actual size of the objects the scale used is said to be_________

38 / 127

When drawings are drawn smaller than the actual size of the objects the scale used is said to be_________

39 / 127

The following is formed by revolving rectangle about one of its sides which remains fixed

40 / 127

A tetrahedron has four equal ____ faces

41 / 127

If a solid is cut by a cutting plane parallel to the base of the solid and top part is removed, the remaining part is called

42 / 127

The following are the Solids of revolution except

43 / 127

The following are the Polyhedron except

44 / 127

The Length to Width ratio in case of an arrow head is

45 / 127

The number of line types used in above figure is

engineering drawing mcq

46 / 127

The internal angle of regular hexagon is ___ degree.

47 / 127

The internal angle of regular pentagon is ___ degree.

48 / 127

In aligned system of dimensioning, the dimensions may be read from

49 / 127

Hatching lines are drawn at ___ degree to reference line

50 / 127

The dotted line represents

51 / 127

The following line is used for dimension line

52 / 127

The following line is used for visible outlines.

53 / 127

Which of the following is enlarging scale?

54 / 127

Which of the following is full size scale?

55 / 127

Which of the following represents reducing scale?

56 / 127

Another name of a cube is a

57 / 127

A (n) ________ is created by the motion of a point on a circle as the circle rolled along a straight line

58 / 127

What type of curve is created by the intersection of a plane with a cone which makes an angle with the axis greater than the angle between the side of the cone and the axis?

59 / 127

What type of curve is created by the intersection of a plane parallel to the side of a cone?

60 / 127

Which statement(s) is true about the precedence of lines?

61 / 127

Which type of line has precedence over all other types of lines?

62 / 127

Which line type is thick and black?

63 / 127

Which line type is thin and light?

64 / 127

Which type of line is particular to section drawing?

65 / 127

Which type of line is part of dimension line?

66 / 127

……… is used to draw curves which are not circular.

67 / 127

The part that does not belong to the T-square is

68 / 127

Which of the following drawing tool is used to transfer dimensions when there is repetition of the dimensions?

69 / 127

Which of the following drawing tool is used by architects for making blueprints?

70 / 127

Which of the following instrument is made of thin strips of wood arranged in a line to form a rectangle and on which the drawing is made?

71 / 127

Which of the following instrument can be used to draw accurate perpendicular lines, parallel lines and angular lines?

72 / 127

Which of the following instrument is used to draw horizontal lines?

73 / 127

Keeping one leg of the compass straight what is the maximum diameter of the circle that can be drawn?

74 / 127

For drawing arcs of radius less than 25mm, which of the following instrument is used?

75 / 127

Which of the following instrument is used to draw circles with more than 150 mm radius accurately?

76 / 127

Which part of the drawing board guides the T-square?

77 / 127

In the manual drawing, which instrument is used to draw smooth curve passing through defined points?

78 / 127

Which of the following pencil grade is used in general for lettering and object lines?

79 / 127

The following is not included in title block of drawing sheet

80 / 127

Drawing helps in

81 / 127

Generally, height of letters in drawing sheet is

82 / 127

Which of the following is the component of drawing sheet?

83 / 127

Recommended paper size to be used in D0 type of drawing board is

84 / 127

Size of the D1 drawing board is

85 / 127

What information should be available in engineering drawing?

86 / 127

An engineering change note would be placed:

87 / 127

An assembly drawing normally consists of all of the following pieces, except:

88 / 127

A title block contains all of the following information, except:

89 / 127

When you want to make sure that all of the text stays to the right of a given point on the drawing, you wound set its:

90 / 127

When you want to make the letters of a line of text narrower, you would set its:

91 / 127

A drawing instrument set usually contains all of the following, except:

92 / 127

Which angle cannot be made with either a 45 or 30/60 triangle or a combination of the two?

93 / 127

Which set of lead grades has a grade out of sequence?

94 / 127

The main ingredients of pencil lead are

95 / 127

Which of the following is not used to fix drawing sheet on the board?

96 / 127

Which of the following is the lightest pencil?

97 / 127

Which of the following is softest pencil?

98 / 127

The designation of sheet of size 594 x 841 is

99 / 127

With the combination of Set-square, the following angles can be drawn except

100 / 127

During operation, the two arms of the drafter remain at

101 / 127

The mini drafter serves the purpose of everything except

102 / 127

An accurate record of changes made to release drawing is tracked via:

103 / 127

Trammel method is used in sketching free-hand to draw _______

104 / 127

Which of the following increases proficiency in free hand drawing?

105 / 127

What should be the minimum distance between the hand and the pencil tip while drawing a horizontal line?

106 / 127

Which of the following is wrong to do in sketching?

107 / 127

To sketch an object, which of the following should be done thoroughly?

108 / 127

Which of the following is false regarding sketching?

109 / 127

Which of the following pencil grade is suitable for sketching?

110 / 127

Which of the following is not used in free-hand sketching?

111 / 127

The purpose of sectional view is to show

112 / 127

In a topographical drawing the symbols representing natural features are drawn
by free hand while artificial works are drawn by

113 / 127

General structural drawing would typically include:

114 / 127

In the first angle method of orthographic projection

115 / 127

In engineering free hand drawing is mostly used for

116 / 127

The main purpose of as built drawing is

117 / 127

Free hand drawing is used for

118 / 127

Free hand sketch is normally used for

119 / 127

As built drawing is normally constructed …………

120 / 127

Concept drawing is normally provided for the work of

121 / 127

Topographical map is used to represent

122 / 127

The maps which are on sufficient large scale to enable the individual features shown on the map to be identified on the ground by their shape and position are
called:

123 / 127

Site plan is a

124 / 127

Working drawings

125 / 127

The set of technical drawings used during the manufacturing phase of the product including civil construction are known as

126 / 127

Working drawing is not prepared for

127 / 127

Working/drawing space on the paper is determined by

Your score is

The average score is 0%

0%

Drawing Techniques: Mastering the Basics and Beyond

Drawing is a timeless art form that allows us to express our thoughts, emotions, and creativity on paper. Whether you’re a beginner exploring the world of art or an experienced artist aiming to refine your skills, understanding essential drawing techniques can significantly enhance your artistic journey. In this blog post, we delve into fundamental and advanced drawing techniques to inspire and guide you.

The Basics of Drawing Techniques

1. Sketching

Sketching is the foundation of all drawings. It involves creating rough outlines or preliminary drafts to map out the composition. Key tips for effective sketching:

  • Use light strokes to ensure easy erasing and adjustments.
  • Focus on capturing the proportions and overall structure.
  • Practice gesture drawing to capture the essence of movement and pose.

2. Shading

Shading adds depth and dimension to your drawings. Popular shading techniques include:

  • Hatching: Drawing closely spaced parallel lines.
  • Cross-hatching: Layering intersecting lines for darker areas.
  • Blending: Using tools like blending stumps or your fingers to smooth gradients.
  • Stippling: Creating texture and shadows using small dots.

3. Line Work

Lines are the building blocks of art. Mastering line variation—thick, thin, and textured lines—can bring dynamism to your drawings.

4. Perspective Drawing

Perspective gives your artwork a sense of depth and realism. There are three main types:

  • One-point perspective: Best for simple scenes with a single vanishing point.
  • Two-point perspective: Ideal for objects or scenes viewed at an angle.
  • Three-point perspective: Used for dramatic viewpoints, like looking up or down at an object.

See Also: Airport Engineering Quiz Set-1

Advanced Drawing Techniques

1. Dynamic Composition

A well-planned composition can make your artwork stand out. Use principles such as the Rule of Thirds, leading lines, and focal points to guide the viewer’s eye through your drawing.

2. Negative Space Drawing

This technique focuses on the space around and between the subject. By practicing negative space drawing, you can improve your understanding of proportions and spatial relationships.

3. Texture Rendering

Textures bring life to your drawings. Whether it’s the smoothness of glass, the roughness of tree bark, or the fluffiness of fur, mastering texture rendering can make your artwork more realistic.

4. Chiaroscuro

This is the dramatic use of light and shadow to create contrast and volume. Popularized by Renaissance artists like Caravaggio, chiaroscuro is an excellent way to add drama and focus to your work.

Essential Tools for Drawing

To get started, you’ll need a few basic tools:

  • Pencils: Graphite pencils in various grades (e.g., HB, 2B, 6B) for sketching and shading.
  • Paper: Use quality sketchpads or specialized drawing paper for better results.
  • Erasers: Both standard and kneaded erasers for correcting and highlighting.
  • Blending Tools: Such as blending stumps or tortillons.
  • Markers and Pens: For line work and detailing.

Tips to Improve Your Drawing Skills

  1. Practice Daily: Even 10 minutes of daily sketching can improve your skills over time.
  2. Study References: Observe real-life objects, photos, or other artists’ works to understand shapes, proportions, and lighting.
  3. Experiment: Try different styles and mediums to discover what suits you best.
  4. Seek Feedback: Share your work with peers or mentors to gain constructive criticism.
  5. Take Breaks: Resting your eyes and hands can help you notice details you might have missed.

See Also: Tunnel Engineering Quiz Set-1

Frequently Asked Questions (FAQ)

1. How can I improve my drawing accuracy?

To improve accuracy, start with basic shapes and use guidelines to map out proportions. Regularly practice observational drawing by sketching real-life objects.

2. What is the best way to learn shading?

Begin by understanding light sources and how they create shadows. Practice with simple objects like spheres or cubes and use different shading techniques like hatching and blending.

3. Which pencil grade should I use for detailed drawings?

For detailed drawings, use harder pencils like H or HB for fine lines and softer pencils like 2B or 4B for shading and dark areas.

4. Can I use digital tools for drawing?

Absolutely! Digital drawing apps like Procreate, Adobe Photoshop, and Krita provide versatile tools and features for both beginners and professionals.

5. How long does it take to become good at drawing?

There’s no fixed timeline. Progress depends on consistent practice, dedication, and learning. Regular practice can show noticeable improvement within a few months.

Leave a Comment